|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this OME 5mm trim packer for adjustment on the front strut assembly, typically to correct the "driver's side lean."
|
Bolt kit is required when installing shims with King/Fox/Icon Coilovers.
|
1/4" thick polyurethane spacer for your front suspension. Fits on top of the upper strut plate. Single 1/4″ spacers will normally fit without longer studs. Provides approxmately 3/8″ lift. These are custom made from an extremely tough and hard polyurethane formula, no crushing or cracking. Much cheaper than steel or aluminum.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coachbuilder Front Strut Shim provide .50" of lift. You can use 1-2 per side. Installed above the top plate of the strut/coilover, instructions included. Bolt kit is required when installing with King/Fox/Icon 2.5 Coilovers.
|
This kit will drop the front differential of your Toyota Tacoma and is designed to put your factory CV shafts back to the stock angle after installing a 2-3" front leveling lift kit.
|
This Coachbuilder front differential drop kit lowers the front diff by 1" and reduces the CV angle improving geometry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KYB strut mount plates are OE-quality replacement components designed to keep your strut in place.
|
|
This 2.5" strut spacer is extremely high quality & fabricated from 1/4" steel, stamped top plates, & standardized hardware across all applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes strut shims for 1" of lift, along with the necessary bumpstop extension kit and hardware.
|
This High Density Progressive Polyurethane Coil Spacer lifts vehicles without sacrificing ride quality. It increases vehicle height, enhances performance, improves ground clearance, and allows for larger tires. Limited Lifetime Warranty. Fits 05+ Toyota Tacomas.
|
This 2.5" strut spacer is extremely high quality & fabricated from 1/4" steel, stamped top plates, and standardized hardware across all applications. This kit includes differential drop spacers for 4WD applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
|
Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
|
ICON uniball service kit used to replace worn uniballs in all ICON tubular or billet uniball upper control arms (uca's).
Kit includes:
(QTY.2) Replacement Uniballs
(QTY.2) Spiroloc retainer rings
(QTY.1) Anti-seize tube
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Are you ready to Lift your 2005 - 2013 Toyota Tacoma / Prerunner 2wd / 4wd truck, but need something a little more afforadable then the higher end suspension shock systems or lift kits that are available?
|
Upgrade worn ball joints on your SPC Performance Adjustable Upper Control Arms with these new joints. These ball joints are a direct replacement for the original joints that came with SPC Upper Control Arms only. Not for use with other upper control arms. Replaces Ball Joint on SPC Arms - 25460, 25470, 25485, 25540, 25660.
|
Front coil springs for use with 6112 and 8112 shocks only. Not for use with OEM style shocks. Designed for 80-140 lbs. of added weight on '05+ Tacomas, '03+ 4Runners, and FJ Cruisers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nitrocharger Sport is the most advanced and innovative 4x4 shock absorber on the market, and is now available for a range of 4WDs.
|
OME coils springs generally provide 1.75" to 2" of suspension lift. They are designed around providing ideal handling and control for the vehicle and the particular load you're carrying. The lift height is more of a side effect than an aim and we choose to do this so that you can have the safest and most controlled handling combined with the most comfortable ride. OME coils are the ideal way to handle all of the additional weight you pack into your vehicle when heading out for your next adventure. Further fine tuning for your vehicle suspension system can be achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system, designed specifically to suit your vehicle. A four-wheel drive equipped with an OME Suspension combination will exhibit better towing and load carrying characteristics, improved wheel travel, and will ride and handle better over any road or trail surface.
See "technical specs" tab for application guide.
|
OME coils springs generally provide 1.75" to 2" of suspension lift. They are designed around providing ideal handling and control for the vehicle and the particular load you're carrying. The lift height is more of a side effect than an aim and we choose to do this so that you can have the safest and most controlled handling combined with the most comfortable ride. OME coils are the ideal way to handle all of the additional weight you pack into your vehicle when heading out for your next adventure. Further fine tuning for your vehicle suspension system can be achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system, designed specifically to suit your vehicle. A four-wheel drive equipped with an OME Suspension combination will exhibit better towing and load carrying characteristics, improved wheel travel, and will ride and handle better over any road or trail surface.
See "technical specs" tab for application guide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get Timbren Suspension Enhancement Systems (SES) for the best ride and handling for off-roading and towing.
|
Active Off-Road Bumpstops are made of durable, natural rubber. They smooth out the ride while supplying tough control to your Toyota suspension.
|
Fabricated used DOM tubing, vulcanized rubber bushings and high strength ball joints, with a durable powder coat finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FOX direct replacement shocks deliver race-winning performance in a simple direct replacement bolt on shock. Each application has been rigorously tested by Fox's engineers to maximize suspension travel and performance on and off the road. Direct replacement shocks are available in hundreds of applications from stock to lifted, as well as aftermarket kit replacements.
|
Maxtrac Suspension has introduced a new option to replace the light, fragile, stock steering knuckles on the Toyota Tacoma and FJ Cruiser platforms. These 4" lifted spindles are a beefy piece of machinery, constructed out of ductile iron from a cast mold, a giant upgrade over the OEM parts. With a true increase in ground clearance, this gives you options for bigger wheels and tires, new places to explore, and the confidence in solid parts handling it all. Due to these lifted spindles maintaining stock steering geometry, you can continue to run the OEM front struts / coilovers, along with being able to continue to modify your suspension with additional strut spacers, aftermarket coilovers, or new control arms which utilize the stock mounting components.
|
Adjust camber and caster for maximum handling and performance with these adjustable control arms by SPC Performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for the serious off-road adventure seeker, the all new BILSTEIN 6112 Series Kit is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities.
|
Designed for the serious off-road adventure seeker, the all new BILSTEIN 6112 Series Kit is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities.
|
Take the performance of your 2005-UP Toyota Tacoma to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit.
|
|
|
