|
|
|
|
|
|
|
|
|
|
|
|
|
|
D-Ring Style Shackle 16 x 19mm 3.25
|
D-Ring Style Shackle made from forged steel, 19 x 22mm 4.75, powdercoated yellow. 10,300-lb rated (4,700-kg) with conditional 12-month warranty.
|
TJM XGS U-bolt, 14mm Round for 1965-1980 Toyota FJ40 Landcruisers (Driver Side Outer & Passenger Side), 14mm x 83mm x 215mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14mm x 85mm x 235mm square u-bolt
|
The recovery device made for the recovery device. TRED leashes assist in locating your TREDs should they bury beyond sight after vehicle recovery. Features floating padded handle. Available as an optional accessory and sold in pairs.
|
Large recovery gloves in TJM's signature colors - black & yellow. Made from cowhide, synthetic leather, neoprene and spandex to properly protect your hands during recovery efforts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features neoprene protectors, polyester webbing, and reinforced eyes. Includes 12-month conditional warranty.
|
Heavy Duty Carry Bag for 31"L TREDs.
|
These wheel spacers add extra width to the front or rear of your Toyota for a more aggressive stance and improved handling. Wheel attaches to studs on spacer with stock lug nuts. Easy bolt-on installation, no removal of studs is needed and installation can be performed in just minutes. 6 on 5.5" pattern. Made from high quality, precision machined 6061-T6 aluminum. With a 106.2mm center bore, these spacers are hub centric to the hub and to the factory wheels to eliminate the chance of vibration. Includes acorn style lug nuts, but 'ET' style lug nuts are recommended if using with thicker wheels for more thread engagement and on the front hubs of newer Toyotas that have relatively short studs. PLEASE NOTE: These are not compatible with manual locking hubs. Sold individually, enter quantity '2' for a pair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These wheel spacers add extra width to the front or rear of your Toyota axle for a more aggressive stance and improved handling. Wheel attaches to studs on spacer with stock lug nuts. Easy bolt-on installation, no removal of studs is needed and installation can be performed in just minutes. 6 on 5.5" pattern. Made from high quality, precision machined 6061-T6 aluminum. Includes acorn style lug nuts, but 'ET' style lug nuts are recommended if using with thicker wheels for more thread engagement. Sold individually, enter quantity "2" for a pair.
|
3" x 16' (75mm x 5m), 22,000-lb (10,000-kg). Features polyester webbing, reinforced eyes, and neoprene protectors. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes storage bag.
|
Heavy Duty Carry Bag for 42"L TREDs.
|
This TJM Recovery Blanket will make a great addition to your recovery kit!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM's light-weight aluminum hawse-style fairlead, perfect for use with synthetic winch lines.
|
This TJM Winch Strap can be used as an extension to your winch when you find your winch is at full extension and you still cannot find a suitable anchor point. Attach winching strap using a equivalent rated D-Ring or Bow Shackle (also available). Includes a durable storage bag. For nearly 4 decades, TJM has designed, tested and developed the most comprehensive and innovative range of 4WD equipment available in Australian, and now in the USA!
|
Includes mild steel hitch with forged steel 3/4" shackle. Conditional 12 month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This TJM Large Winch Hook is cadmium plated and suitable for use with synthetic winch line with a conditional 12 month warranty.
|
This knuckle rebuild kit includes all of the service parts needed to rebuild your front knuckles: wipes, felts, gaskets, lock washers, inner axle & bearing seals, hub gaskets, knuckle shims, and knuckle bearings. These kits are for '79-85 Toyota Pickups, '84-'85 4Runners, and '79-'90 Land Cruisers. Kit includes parts for both sides of one axle. These are quality components at an unbeatable price and an unmatched 1-year replacement warranty! Please note, wheel bearings are NOT included, but are available for an added price.
|
Large base and adjustable connector clamp will quickly get you out of any situation. Constructed of solid cast steel & finished in a durable powder coat. All hardware is zinc plated. Winch and pull up to 7,000lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gold cadmium plated steel. Includes 2 hooks on ends with canvas carrying bag. 16.4'L (5m), 17,600-lb rated (8,000-kg) with conditional 12 month warranty.
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes conditional 12-month warranty.
|
TJM Recovery Snatch Strap, 13,200-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes recovery jack bag and handle keeper. Made from forged steel with a working load limit of 2,200-lbs (1,000-kg). Conditional 12 month warranty. This is a must have item for all off-roaders at a great price!
|
Bilstein 5100 Series Front Shock for '60-82 Toyota Land Cruiser with 2" lift. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber.
Bilstein's 5125 Series offers Bilstein technology for custom lifted applications. 5125 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include: Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires, Available by travel lengths for custom applications.
|
Bilstein 5100 Series Rear Shock for '60-82 Toyota Land Cruiser with 4" lift. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber.
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber.
|
TJM Recovery Snatch Strap, 17,600-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
Greasable steel pulley with cold rolled steel side plates. Conditional 12 month warranty. Color may vary.
|
|
|
