Home > Accessories > Tubing Clamps
Sort By:
Page of 1
AXIA Alloys Rollbar Strap Clamp AXIA Alloys Windshield Mount Attachment AXIA Alloys Reservoir Shock Mount
AXIA Alloys Windshield Mount Attachment
List Price: $11.95
Our Price: $11.90
Savings: $0.05
AXIA Alloys Reservoir Shock Mount
List Price: $14.95
Our Price: $14.90
Savings: $0.05
AXIA Alloys Rollbar Strap Clamp, Available in Satin (Raw), Black or Silver Anodized, and sizes from .875 to 3.25 in 1/8" increments.  Axia's innovative system allows you to purchase several different sizes of strap clamps depending on your tubing diameter and apply these clamps to a variety of unique attachments.  These strap clamps have an extremely low profile around the tubing for clearance under windshields, roofs, and other accessories, not to mention a custom look that is not available with other larger clamps. These AXIA Alloys Billet Windshield mounts clamp around the cage and can stay in place when the windshied is removed on a hot summer day or to protect it from damage while towing.  Removal of the windshield is simple by removing the supplied billet aluminum knobs.  Sold EACH with 1 strap clamp (MODCL) required for installation. This AXIA Alloys billet mount for shock reservoirs allows you to mount your reservoirs to virtually any size bar using 2 strap clamps (MODCL, sold separately) for installation.  These double sided tubing clamps will hold any size strap clamps, so you can mix and match the tubing size on any one mount.
AXIA Alloys Horizontal Bar Whip Mount Attachment, 1/2" Hole (2 clamp required) AXIA Alloys Small Light Clamp Attachment with.4" Hole (1 clamp required) AXIA Alloys Vertical Bar Whip Mount Attachment, 1/2" Hole (1 clamp required)
AXIA Alloys Small Light Clamp Attachment with.4" Hole (1 clamp required)
List Price: $16.95
Our Price: $16.90
Savings: $0.05
AXIA Alloys Vertical Bar Whip Mount Attachment, 1/2" Hole (1 clamp required)
List Price: $16.95
Our Price: $16.90
Savings: $0.05
This horizontal flag mount has an industry standard 1/2" hole machined on the top.  Requires 2 strap clamps (MODCL) to hold it so that it will not rotate on the bar at high speeds. This small light mount allows you to clamp a wide variety of offroad lights directly to your front tube bumper or cage.  Recommended for 4" lights.  It can be mounted with the mounting hole in front of the tubing if there are clearance issues or behind the tubing for a very clean install. No need to purchase an expensive light bar or grind away expensive powder coating to weld on light tabs. These clamps allow you to put your lights wherever you would like them.  This small light mount has a .400" (10mm) hole. This vertical bar whip mount is the lightest, lowest profile whip mount on the market, yet by design is strong and can handle high speeds.  This mount has a machined industry standard 1/2" hole.  To mount on the rear of a RZR cage, use a 1.7" strap clamp.
AXIA Alloys LED Light Bar Mount AXIA Alloys Large Light Clamp Attachment with .4" Hole (2 clamps required) AXIA Alloys Registration Sticker Mount
AXIA Alloys LED Light Bar Mount
List Price: $19.95
Our Price: $19.50
Savings: $0.45
AXIA Alloys Large Light Clamp Attachment with .4" Hole (2 clamps required)
List Price: $19.95
Our Price: $19.90
Savings: $0.05
AXIA Alloys Registration Sticker Mount
List Price: $19.95
Our Price: $19.90
Savings: $0.05
You can position your end mount light bar Between 1.7" and 2.8" from the leading edge of the mounting bar to the center of the mounting screw.  These pivoting clamps will allow you to mount up to a 50” light bar to your cage even if the your cage does not run parallel to the light bar. A simple solution for mounting on cages, bumpers, wakeboard towers, and more! This large light mount allows you to mount a wide variety of offroad lights directly to your front bumper, cage, wakeboard tower or any round tubing.  Recommended for 7" and larger lights.  Requires 2 strap clamps (MODCL, sold separately) and is available in satin, black or silver anodize. This registration sticker mounting plate (green sticker plate) allows you to mount your registration sticker on either a horizontal or vertical mounting bar from .875" to 2.375" diameter.  Requires 1 strap clamp (MODCL) for installation.
AXIA Alloys Antenna Mount AXIA Alloys A-Pillar Light Clamp Attachment for angeled bar AXIA Alloys GoPro Camera Mount
AXIA Alloys Antenna Mount
List Price: $24.95
Our Price: $24.90
Savings: $0.05
AXIA Alloys A-Pillar Light Clamp Attachment for angeled bar
List Price: $24.95
Our Price: $24.90
Savings: $0.05
AXIA Alloys GoPro Camera Mount
List Price: $24.95
Our Price: $24.90
Savings: $0.05
This billet antenna mount will attach to you vehicle tubing either below or above your horizontal mounting bar. Mounts all popular brands of radio antenna including PCI and Rugged Radios. These A pillar light mounts allow you to mount a wide variety of off road lights directly to the angled front side bars on your vehicles roll cage.  Brackets are angled to give you a nice flat mounting point and to be able to direct your lights whereever you like them.  They come with a 10mm (.4") hole drilled through, but because they are aluminum, they can easily be drilled out for a larger mounting bolt.  These also make a great way to mount lights on the top rack of FJ Cruisers or any vehicle with angled tubing.  Sold each with 1 strap clamp required for installation (MODCL).

Fully adjustable GoPro Camera mount, made from billet aluminum, allows for 360 degree rotation so you set your camera precisely to your preferred field of view. Ths mount is also compatible with all of the camera's supplied mounting accessories so that you can mount the camera perpendicular to the bar and more. Works great as a handlebar mount as well.

AXIA Alloys Universal GPS/iPod/iPhone Cage Mount AXIA Alloys Universal GPS/iPod/iPhone Surface Mount AXIA Alloys Lowrance GPS Cage Mounts, Pair
AXIA Alloys Universal GPS/iPod/iPhone Cage Mount
List Price: $24.95
Our Price: $24.90
Savings: $0.05
AXIA Alloys Universal GPS/iPod/iPhone Surface Mount
List Price: $29.99
Our Price: $29.90
Savings: $0.09
AXIA Alloys Lowrance GPS Cage Mounts, Pair
List Price: $34.95
Our Price: $34.90
Savings: $0.05
Surface mount your IPhone, IPod Touch, Handheld GPS, or IPod Nano with these unique mounts. Features an adjustable silicone strap and embossed rubber backing plate so that your accessory stays put in the most demanding off road environment. The backing plate is also recessed in the center so that GPS systems with curved backing plates will not rattle. Comes with 2 straps so you can adjust this mount for a custom fit around your device. GAURANTEED TO HOLD YOUR PHONE / GPS IN ALL CONDITIONS (yes even on a dirt bikes handlebars). This versatile mount can be mounted on the dash, inside the glove box, on top of the center console, virtually any surface that you can tighten a nut on the backside. Consider it cheap insurance to keep your expensive device safe. These Lowrance GPS mounts mount your GPS to a horizontal tube of any size.  Requires 2 strap clamps (MODCL) for installation (sold separately).  MOUNTS ANY OF THE FULLSIZE LOWRANCE GPS'S THAT HAVE THE THREADED HOLES ON THE SIDES.
AXIA Alloys Grab Handle Attachment AXIA Alloys 5.0" Round Convex Side Mirror Attachment (1 clamp required) AXIA Alloys 4.0" Round Convex Side Mirror Attachment (2 clamps required)
AXIA Alloys Grab Handle Attachment
List Price: $39.95
Our Price: $39.90
Savings: $0.05
AXIA Alloys 5.0" Round Convex Side Mirror Attachment (1 clamp required)
List Price: $49.95
Our Price: $49.00
Savings: $0.95
AXIA Alloys 4.0" Round Convex Side Mirror Attachment (2 clamps required)
List Price: $69.95
Our Price: $69.00
Savings: $0.95
This AXIA Alloys grab handle is precision machined out of aircraft quality billet aluminum with cut outs that fit the contours of your hand.  This is the lightest and best looking billet grab handle on the market.  With the use of 2 strap clamps (MODCL) this grab handle is stout! AXIA Alloys 5.0" convex round side mirror, scratch resistant.  Mounts vertically, horizontally on tubing at any angle.  This mirror requires 1 strap clamp (MODCL) for installation.  Available in black, satin, or clear anodize.  Axia offers a liftime warranty on all mirrors. FREE REPLACEMENT of your mirror insert. AXIA Alloys 4.0" billet convex round side mirror, scratch resistant, strong billet aluminum construction, fully adjustable and locks into position.  This mirror requires 2 strap clamps (MODCL) for installation.  Available in black, satin, or clear anodize.  Axia offers a liftime warranty on all mirrors. FREE REPLACEMENT of your mirror insert.
Power Tank Small Aluminum Billet Clamp, Pair, BLACK (Fits 1.5"-2.0" dia.) Power Tank Large Aluminum Billet Clamp, Pair, BLACK (Fits 2.25"-2.5" dia.) AXIA Alloys Cargo Mounting System for Coolers/Gas Cans
Power Tank Small Aluminum Billet Clamp, Pair, BLACK (Fits 1.5"-2.0" dia.)
List Price: $76.95
Our Price: $69.95
Savings: $7.00
Power Tank Large Aluminum Billet Clamp, Pair, BLACK (Fits 2.25"-2.5" dia.)
List Price: $76.95
Our Price: $69.95
Savings: $7.00
AXIA Alloys Cargo Mounting System for Coolers/Gas Cans
List Price: $79.95
Our Price: $79.00
Savings: $0.95
These Aluminum Billet Clamps make mounting your Power Tank easy and clean. The compact design allows it to fit between the roll bar and the inside of the rig. The allen socket button head bolts are nothing less than stainless steel. Sold in pairs. Fits tubing diameters: 1.50", 1.75", 2.00". So you say you just can't bear to remove that nice rollbar padding, we hear ya. Leave the padding on and still be able to clamp your bracket to your rollbar with these wider cut Rollbar Clamps. They also fit 2 3/8" dia. (Bronco) and 2 1/4" dia. tubing (Wrangler without padding). For 2004 and later Wrangler owners, note that there may be an extra layer of rigid foam beneath the zippered padding and a small amount of it will have to be removed to allow the clamp bolts to get started. The "grip groove" inside the clamp keeps shims from shifting during heavy offroad racing. The AXIA Alloys Cargo System is the most versatile UTV mounting system on the market. These two adjustable arms allow you to mount virtually anything to a horizontal crossbar on the roll cage.  These extremely strong arms are machined from aircraft quality aluminum so that they are strong enough for virtually any size cooler, one or two gas cans, duffel bags, toolboxes, camping gear, etc.  When not in use they can easily be rotated up and out of the way for more rear passenger leg room or other cargo.  They are supplied with several different lengths of Velcro straps to hold both small and large items.  A roll cage with a horizontal bar either located in front of or along the side of the bed are required to properly use this mounting system.  MAKES A GREAT MOUNT ON THE TOP OF AN FJ CRUISER OR ANY OTHER VEHICLES ROOF RACK.  All that is required is a parallel tube running above a flat surface for the cooler to rest on.
AXIA Alloys 9.0" Wide Panoramic Rearview Mirror (1 clamp required) AXIA Alloys 9.0" Wide Panoramic Rearview Mirror with 6" Arm (1 clamp required) AXIA Alloys Quick Release Fire Extinguisher Mount
AXIA Alloys 9.0" Wide Panoramic Rearview Mirror (1 clamp required)
List Price: $99.95
Our Price: $99.00
Savings: $0.95
AXIA Alloys 9.0" Wide Panoramic Rearview Mirror with 6" Arm (1 clamp required)
List Price: $109.95
Our Price: $109.00
Savings: $0.95
AXIA Alloys Quick Release Fire Extinguisher Mount
List Price: $129.95
Our Price: $129.00
Savings: $0.95
AXIA Alloys 9.0" wide panoramic review mirror, shatter resistant glass, fully adjustable for multiple mounting positions.  Available in black, satin, or clear anodize.  These mirrors are only convex in the horizontal direction so that your surroundings appear exactly where they are in relation to your vehicle. Competitors mirrors that are more drastically convex in the horizontal and vertical directions and can make objects appear much further away than they really are.  Axia offers a liftime warranty on all mirrors. FREE REPLACEMENT of your mirror insert.  Requires 1 strap clamp (MODCL) for installation. AXIA Alloys 9.0" wide panoramic review mirror, shatter resistant glass, fully adjustable for multiple mounting positions with a 6" extended arm, perfect for use with stock Teryx, Rhino, and Commander cages.  Available in black, satin, or clear anodize.  These mirrors are only convex in the horizontal direction so that your surroundings appear exactly where they are in relation to your vehicle. Competitors mirrors that are more drastically convex in the horizontal and vertical directions and can make objects appear much further away than they really are.  Axia offers a liftime warranty on all mirrors. FREE REPLACEMENT of your mirror insert.  Requires 1 strap clamp (MODCL) for installation. The AXIA Alloys billet fire extinguisher mount is made from aircraft grade 6061 aluminum and stainless steel components that are precision machined for a perfect fit.  All contact points are o-ringed so that it will not wear or rattle, even in the most demanding off-road environments.  Just pull the red quick release handle and the fire extinguisher is ready to go.  Designed to fit a 2-lb. Kidde extinguisher (sold separately). This Axia Alloys quick release fire extinguisher mount requires 2 strap clamps (MODCL, sold separately) for installation and must be shipped UPS Ground if ordered with the extinguisher.
AXIA Alloys 17" Wide Panoramic Rearview Mirror with 1.5" Mounts (2 clamps required) AXIA Alloys 17" Wide Panoramic Rearview Mirror with 6" Mounts (2 clamps required)
This 17" billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slightly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.  This is the SHORT ARM version. 1.5" mounting length.  Axia alloys recommends that you use the 1.5" length arms on aftermarket cages where the mounting bar is far enough in front of you.  Use 1.5" arms on the following OEM cages: Polaris RZR, XP, RZR 4, & Ranger.  Axia offers a lifetime warranty on all mirrors. FREE REPLACEMENT of your mirror insert. Ultra thin with an ultra clean view, the AXIA Alloys 17" billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market.  This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.  This is the LONG ARM version of this mirror, shorter arms are available.  Axia Alloys recommends that you use these 6" length arms on OEM UTV, and aftermarket cages where the mounting bar is moved back closer to the drivers head, these 6" arms are to mount the mirror further out.  Axia offers a lifetime warranty on all mirrors. FREE REPLACEMENT of your mirror insert.