|
|
|
|
|
|
|
|
|
|
|
|
|
|
D-Ring Style Shackle 16 x 19mm 3.25
|
D-Ring Style Shackle made from forged steel, 19 x 22mm 4.75, powdercoated yellow. 10,300-lb rated (4,700-kg) with conditional 12-month warranty.
|
The recovery device made for the recovery device. TRED leashes assist in locating your TREDs should they bury beyond sight after vehicle recovery. Features floating padded handle. Available as an optional accessory and sold in pairs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large recovery gloves in TJM's signature colors - black & yellow. Made from cowhide, synthetic leather, neoprene and spandex to properly protect your hands during recovery efforts.
|
The TeraFlex Polyurethane coil spring spacer is intended to balance loads and compensate for winches and heavy equipment. The lift can be 3/4" or 1-1/4" high, depending on the inclusion or removal of the stock rubber spacer. Fits 97-06 Jeep Wrangler TJs.
|
These 5 on 4.5" bolt pattern wheel spacers are 1.25" thick, adding 2.5" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. Sold individually, enter quantity "2" for a pair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bump Stops are a critical part of your vehicle's suspension - they prevent damaging over-compression and eliminate harsh bottoming of the suspension. Daystar's Bump Stops are designed and tested under the most rigorous conditions imaginable to deliver positive stopping power without deflecting.
|
These 5 on 4.5" bolt pattern wheel spacers are 1.5" thick, adding 3.0" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. Sold individually, enter quantity "2" for a pair.
|
Bump Stops are a critical part of your vehicle's suspension - they prevent damaging over-compression and eliminate harsh bottoming of the suspension. Daystar's Bump Stops are designed and tested under the most rigorous conditions imaginable to deliver positive stopping power without deflecting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TeraFlex Polyurethane coil spring spacer is intended to balance loads and compensate for winches and heavy equipment. The lift can be 1-1/2" or 2" high, depending on the inclusion or removal of the stock rubber spacer. Fits 97-06 Jeep Wrangler TJs.
|
Features neoprene protectors, polyester webbing, and reinforced eyes. Includes 12-month conditional warranty.
|
These 5 on 4.5" bolt pattern wheel spacers are 2.0" thick, adding 4.0" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. Sold individually, enter quantity "2" for a pair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy Duty Carry Bag for 31"L TREDs.
|
|
3" x 16' (75mm x 5m), 22,000-lb (10,000-kg). Features polyester webbing, reinforced eyes, and neoprene protectors. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes storage bag.
|
Heavy Duty Carry Bag for 42"L TREDs.
|
This TJM Recovery Blanket will make a great addition to your recovery kit!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM's light-weight aluminum hawse-style fairlead, perfect for use with synthetic winch lines.
|
Pro Comp Suspension Recovery Straps are a must for any on or off-road vehicle. Tear and mildew resistant nylon material assures long life and stretch required or an effective recovery of a stuck vehicle. Pro Comp Suspension Recovery Straps feature covered triple sewn end loops that resist cuts and abrasions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This TJM Winch Strap can be used as an extension to your winch when you find your winch is at full extension and you still cannot find a suitable anchor point. Attach winching strap using a equivalent rated D-Ring or Bow Shackle (also available). Includes a durable storage bag. For nearly 4 decades, TJM has designed, tested and developed the most comprehensive and innovative range of 4WD equipment available in Australian, and now in the USA!
|
Includes mild steel hitch with forged steel 3/4" shackle. Conditional 12 month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present. How it works: the elasticity in a snatch strap is what makes it such an essential piece of recovery gear. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
|
Large base and adjustable connector clamp will quickly get you out of any situation. Constructed of solid cast steel & finished in a durable powder coat. All hardware is zinc plated. Winch and pull up to 7,000lb.
|
Gold cadmium plated steel. Includes 2 hooks on ends with canvas carrying bag. 16.4'L (5m), 17,600-lb rated (8,000-kg) with conditional 12 month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes conditional 12-month warranty.
|
TJM Recovery Snatch Strap, 13,200-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
Pro Comp Suspension Recovery Straps are a must for any on or off-road vehicle. Tear and mildew resistant nylon material assures long life and stretch required or an effective recovery of a stuck vehicle. Pro Comp Suspension Recovery Straps feature covered triple sewn end loops that resist cuts and abrasions.
|
|
|
