|
|
|
|
|
|
|
|
|
|
|
|
|
|
D-Ring Style Shackle 16 x 19mm 3.25
|
D-Ring Style Shackle made from forged steel, 19 x 22mm 4.75, powdercoated yellow. 10,300-lb rated (4,700-kg) with conditional 12-month warranty.
|
Large recovery gloves in TJM's signature colors - black & yellow. Made from cowhide, synthetic leather, neoprene and spandex to properly protect your hands during recovery efforts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The recovery device made for the recovery device. TRED leashes assist in locating your TREDs should they bury beyond sight after vehicle recovery. Features floating padded handle. Available as an optional accessory and sold in pairs.
|
Heavy Duty Carry Bag for 31"L TREDs.
|
Features neoprene protectors, polyester webbing, and reinforced eyes. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These wheel spacers add extra width to the front or rear of your Toyota for a more aggressive stance and improved handling. Wheel attaches to studs on spacer with stock lug nuts. Easy bolt-on installation, no removal of studs is needed and installation can be performed in just minutes. 6 on 5.5" pattern. Made from high quality, precision machined 6061-T6 aluminum. With a 106.2mm center bore, these spacers are hub centric to the hub and to the factory wheels to eliminate the chance of vibration. Includes acorn style lug nuts, but 'ET' style lug nuts are recommended if using with thicker wheels for more thread engagement and on the front hubs of newer Toyotas that have relatively short studs. PLEASE NOTE: These are not compatible with manual locking hubs. Sold individually, enter quantity '2' for a pair.
|
This TJM Recovery Blanket will make a great addition to your recovery kit! Dampens energy in winch lines for added safety during recovery.
|
If you are winching or anchoring to a tree, TJM tree trunk protectors can protect both the tree from ring barking and your winch cable from unnecessary wear.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These wheel spacers add extra width to the front or rear of your Toyota axle for a more aggressive stance and improved handling. Wheel attaches to studs on spacer with stock lug nuts. Easy bolt-on installation, no removal of studs is needed and installation can be performed in just minutes. 6 on 5.5" pattern. Made from high quality, precision machined 6061-T6 aluminum. Includes acorn style lug nuts, but 'ET' style lug nuts are recommended if using with thicker wheels for more thread engagement. Sold individually, enter quantity "2" for a pair.
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes storage bag.
|
Heavy Duty Carry Bag for 42"L TREDs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM Recovery Snatch Strap, 13,200-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
TJM's light-weight aluminum hawse-style fairlead, perfect for use with synthetic winch lines.
|
2.5" x 16', 22,000-lb (10,000-kg). Features polyester webbing, reinforced eyes, and neoprene protectors. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM Recovery Snatch Strap, 17,600-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present. How it works: the elasticity in a snatch strap is what makes it such an essential piece of recovery gear. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
|
Includes mild steel hitch with forged steel 3/4" shackle. Conditional 12 month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large base and adjustable connector clamp will quickly get you out of any situation. Constructed of solid cast steel & finished in a durable powder coat. All hardware is zinc plated. Winch and pull up to 7,000lb.
|
Features high tenacity webbing, reinforced eyes, 20% elongation, and neoprene protectors. Thermofixed for long wear. Includes 12-month conditional warranty.
|
TJM snatch blocks effectively double the capacity of your winch. They are also useful in recovery situations where the winch anchor point is not in a direct line of the vehicle winching direction. Greaseable steel pulley with cold rolled steel side plates. Conditional 12 month warranty. Color may vary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present. How it works: the elasticity in a snatch strap is what makes it such an essential piece of recovery gear. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
|
Made from forged steel with a working load limit of 2,200-lbs (1,000-kg). Conditional 12 month warranty. This is a must have item for all off-roaders at a great price!
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes conditional 12-month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present. How it works: the elasticity in a snatch strap is what makes it such an essential piece of recovery gear. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
|
Includes 2 shackles (16mm), 1 pair of heavy-duty leather gloves, and a 17,600-lb rated recovery strap (29.5'L).
|
TJM Synthetic winch rope is a great upgrade for any winch using dated steel cable! Rated at 18,000-lbs, TJM Winch Rope is made using the world's strongest synthetic rope, Dyneema (SK-75).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Rigid Industries lower LED grille is designed specifically for the 2010+ Toyota 4Runner and allows for a clean, discrete install of Rigid Industries high output lighting. This grille accepts two (2) D-Series LED lights (lights not included). This 2-piece grille is made from laser-cut 304 stainless steel and is assembled using stainless steel button socket head bolts and nyloc nuts - no welds. It features a high quality black powder-coat finish and mounts securely using OEM mounting locations. Installation is simple and straight-forward - no drilling or cutting required.
|
This is the perfect recovery kit for the 4WD adventurer with everything you need to tackle most situations.
|
|
|
