|
|
|
|
|
|
|
|
|
|
|
Leather gloves are extremely important when handling recovery accessories, equipment or wire cable as they offer protection to your hands.
|
Designed to allow the airing of a recovery strap after use in wet conditions.
|
Universal recovery leashes, suitable for all recovery boards.
|
|
|
|
|
|
|
|
|
|
|
|
|
A must-have item for Hi-Lift Jack owners! The Hi-Lift Handle Keeper firmly holds the handle in place when not in use and eliminating rattling during transportation and storage.
|
The Daystar D-Ring Isolators install on any standard 3/4" shackle and prevents the shackle from tapping against a bumper or any other recovery point when the vehicle is in motion.
|
Shackles are an essential recovery item and you can never have too many of them! The most commonly used shackle is the "Bow" because its shape allows for bulky items to be easily attached.
|
|
|
|
|
|
|
|
|
|
|
|
|
If you own a Hi-Lift Jack you NEED one of these! These 1 thick polyurethane blocks simply slide over the jack handle and the jack’s I beam to keep them secured together. No more rattling or lost jack handles! Fits all Hi-Lift brand jacks.
|
This kit includes 2 D-Ring Isolators with 4 Polyurethane Washers to eliminate D-ring rattle and noise, Black.
|
Each tow hook is supplied with hardware to complete installation however some may require additional fittings. For added safety the tow hook has a spring steel retaining clip, to prevent straps from falling off during a recovery.
|
|
|
|
|
|
|
|
|
|
|
|
|
Smittybilt's D-Ring Shackles are the perfect vehicle recovery rigging point.
|
The recovery device made for the recovery device. TRED leashes assist in locating your TREDs should they bury beyond sight after vehicle recovery. Features floating padded handle. Available as an optional accessory and sold in pairs.
|
Tree trunk protectors a great addition to your recovery kit. They are designed to protect the tree used as an anchor point for your recovery. If you use anything other than a tree trunk protector you risk damaging both the tree and your winching line and over time may also cause the tree to die.
|
|
|
|
|
|
|
|
|
|
|
|
|
Get added leverage when unspooling your winch's steel cable with this Smittybilt Winch Line Grab Handle featuring an extreme molded handle and ballistic nylon webbing for added strength with versatile universal applications.
|
This Mean Mother equalizer strap has been designed to evenly distribute the load on your vehicle during a recovery operation when connected to two rated recovery points. They are generally used in conjunction with a snatch strap or extension strap and are equipped with a moveable protective sleeve on the strap webbing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most recovery boards.
|
Need to hold two sets (4 units) of TRED 800 or TRED 1100? The Extension Pins are designed to suit the TRED Pro Mounting Bracket and allow two pairs of TRED 800 or TRED 1100 units to mount to them.
Note. The Extensions Pins are not required for two sets (4 units) of the TRED Pro.
|
Smittybilt Trail Gloves are anatomically engineered with direct sonic welded rubber tops and EVA foam palm pads for improved protection. They feature reinforced finger tips, palm and knuckle proctection.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits all winches with standard 3/8 -16 mounting hardware.
|
This revolutionary recovery strap is compact, yet rated to pull up to 3,500-lbs. No shackles, no knots, no hassle! Simply wrap, weave, and pull! Easily weave a secure loop at each end, set any desired pull length. Great for motorcycle, atv, utv, snowmobile, and utility applications.
|
This Smittybilt multi-purpose snatch block will double the pulling power of any winch and can change your pulling direction without damaging the wire rope. Use of the snatch block will also help in reducing heat build up and amperage draw.
|
|
|
|
|
|
|
|
|
|
|
|
|
4500kg minimum breaking strength. Black polyester webbing, yellow reinforced eyelets protectors.
|
Heavy Duty Carry Bag for 31"L TREDs.
|
This Hi-Lift mount can be installed on any flat surface 2-1/2" wide or more. Drilling is required. Kit includes: 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts, 1 handle strap.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from durable 7/16" diameter Dyneema rope, spliced on one end, knotted on the other, creating a 6" diameter when looped. With a breaking strength of 36,000-lbs., this shackle is great for off-road use as well as marine (floats) and many other applications. Flexibility allows for quick and easy installation around anchor points. NOTE: Do not use on sharp corners.
|
This Smittybilt 2" x 20' recovery strap utilizes double-stitched webbing, with a double hoop design. These recovery straps are rated for 20,000 lbs. Look to Smittybilt for recovery straps to help guide you out of any situation!
|
Features neoprene protectors, polyester webbing, and reinforced eyes. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Mean Mother equalizer strap has been designed to evenly distribute the load on your vehicle during a recovery operation when connected to two rated recovery points. They are generally used in conjunction with a snatch strap or extension strap and are equipped with a moveable protective sleeve on the strap webbing.
|
The Smittybilt 4" x 8' recovery strap utilizes double-stitched webbing, with a double hoop design. These recovery straps are rated for 40,000 lbs. Look to Smittybilt for recovery straps to help guide you out of any situation. This size makes a perfect tree trunk saver when you need to use mother nature as a recovery anchor.
|
|