Home > UTV > Yamaha
Sort By:
Page of 1
AXIA Alloys Registration Sticker Mount PRP Holy Moly Handle Speedstrap 1/2" Pockit-Tow, 3,500-lb (Multiple Length Options)
AXIA Alloys Registration Sticker Mount
List Price: $19.95
Our Price: $19.90
Savings: $0.05
PRP Holy Moly Handle
List Price: $20.00
Our Price: $19.95
Savings: $0.05
Speedstrap 1/2" Pockit-Tow, 3,500-lb (Multiple Length Options)
List Price: $24.95
Our Price: $22.45
Savings: $2.50
This registration sticker mounting plate (green sticker plate) allows you to mount your registration sticker on either a horizontal or vertical mounting bar from .875" to 2.375" diameter.  Requires 1 strap clamp (MODCL) for installation. Made in the USA! This revolutionary recovery strap is compact, yet rated to pull up to 3,500-lbs.  No shackles, no knots, no hassle!  Simply wrap, weave, and pull!  Easily weave a secure loop at each end, set any desired pull length.  Great for motorcycle, atv, utv, snowmobile, and utility applications.
PRP Emergency CV Boot Covers 1" Yamaha Wheel Spacer, 4x110mm, EA 2" Yamaha Wheel Spacer, 4x110mm, EA
PRP Emergency CV Boot Covers
List Price: $25.00
Our Price: $24.95
Savings: $0.05
2" Yamaha Wheel Spacer, 4x110mm, EA
Our Price: $29.99
Sale Price: $26.99
Savings: $3.00
Use this boot during a race or out on a weekend when you don’t have time to change your boot. This will help keep rocks and sand out of your CV until you have time to change your torn boot. They are very easy to install with hook and loop straps and you don’t need to remove your CV. All sizes will fit a 1.25" dia. axle shaft at the small end.
These 4 on 110mm bolt pattern wheel spacers are 1.0" thick, adding 2.0" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. Sold individually, enter quantity "2" for a pair. These 4 on 110mm bolt pattern wheel spacers are 2.0" thick, adding 4.0" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. Sold individually, enter quantity "2" for a pair.
ProComp Recovery Snatch/Tow Strap, 1"W x 15'L, 10,000-lb PRP Paracord Holy Moly Handle AXIA Alloys Rhino/Ranger/Prowler Shift Knob, Polished
ProComp Recovery Snatch/Tow Strap, 1"W x 15'L, 10,000-lb
List Price: $31.99
Our Price: $30.39
Savings: $1.60
PRP Paracord Holy Moly Handle
List Price: $35.00
Our Price: $33.95
Savings: $1.05
AXIA Alloys Rhino/Ranger/Prowler Shift Knob, Polished
List Price: $34.95
Our Price: $34.90
Savings: $0.05
Pro Comp Suspension Recovery Straps are a must for any on or off-road vehicle. Tear and mildew resistant nylon material assures long life and stretch required or an effective recovery of a stuck vehicle. Pro Comp Suspension Recovery Straps feature covered triple sewn end loops that resist cuts and abrasions. Made in the USA! Shift knob for the Yamaha Rhino, Polaris Ranger and Arctic Cat Prowler.
Smittybilt Rope Shackle 7/16", 36,000-lb rating AXIA Alloys Rhino 700FI Exhaust Outlet, Satin PRP Rhino/Teryx Mount for 36" or 42" Bench Seat
AXIA Alloys Rhino 700FI Exhaust Outlet, Satin
List Price: $43.95
Our Price: $43.90
Savings: $0.05
PRP Rhino/Teryx Mount for 36" or 42" Bench Seat
List Price: $95.00
Our Price: $95.00
Made from durable 7/16" diameter Dyneema rope, spliced on one end, knotted on the other, creating a 6" diameter when looped.  With a breaking strength of 36,000-lbs., this shackle is great for off-road use as well as marine (floats) and many other applications.  Flexibility allows for quick and easy installation around anchor points.  NOTE: Do not use on sharp corners. This AXIA Alloys billet performance exhaust tip fits on the end of your OEM 2008-2012 Yamaha 700FI Rhino exhaust system, increasing your rides overall performance and sound.  This is the best looking and most unique billet exhaust tip on the market with its 15 degree angled outlet and machined gunbarrel divots at the tip.  This angled outlet directs the exhaust fumes down and away from your tailgate.  This modification alone on your UTV provides a noticeable increase in low end acceleration and midrange throttle response.  On a stock Rhino, this tip will not increase your top speed as the Yamaha ignition system has a rev limiter that kicks in around 42mph.  To take full advantage of this and other modifications, you would need to use this tip in conjunction with an aftermarket programmable power commander or other ignition module.  This exhaust tip comes complete with brand new stainless steel hardware and spark arrestor to make this two minute installation a breeze.  FITS 2008-2012 Yamaha Rhino 700 w/Fuel Injection.
AXIA Alloys 9.0" Wide Panoramic Rearview Mirror with 6" Arm (1 clamp required) PRP Steel Seat Mount for Rhino or Teryx - Pair AXIA Alloys 17" Wide Panoramic Rearview Mirror with 6" Mounts (2 clamps required)
AXIA Alloys 9.0" Wide Panoramic Rearview Mirror with 6" Arm (1 clamp required)
List Price: $109.95
Our Price: $109.00
Savings: $0.95
PRP Steel Seat Mount for Rhino or Teryx - Pair
List Price: $139.00
Our Price: $135.00
Savings: $4.00
AXIA Alloys 9.0" wide panoramic review mirror, shatter resistant glass, fully adjustable for multiple mounting positions with a 6" extended arm, perfect for use with stock Teryx, Rhino, and Commander cages.  Available in black, satin, or clear anodize.  These mirrors are only convex in the horizontal direction so that your surroundings appear exactly where they are in relation to your vehicle. Competitors mirrors that are more drastically convex in the horizontal and vertical directions and can make objects appear much further away than they really are.  Axia offers a liftime warranty on all mirrors. FREE REPLACEMENT of your mirror insert.  Requires 1 strap clamp (MODCL) for installation. Ultra thin with an ultra clean view, the AXIA Alloys 17" billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market.  This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.  This is the LONG ARM version of this mirror, shorter arms are available.  Axia Alloys recommends that you use these 6" length arms on OEM UTV, and aftermarket cages where the mounting bar is moved back closer to the drivers head, these 6" arms are to mount the mirror further out.  Axia offers a lifetime warranty on all mirrors. FREE REPLACEMENT of your mirror insert.
Smittybilt XRC3.0 3,000-lb Winch PRP Rhino/Teryx Sliding Seat Mount, Pair PRP High or Low Back Seat for Yamaha Rhino & Kawasaki Teryx - A18
Smittybilt XRC3.0 3,000-lb Winch
List Price: $179.99
Our Price: $170.99
Savings: $9.00
PRP Rhino/Teryx Sliding Seat Mount, Pair
List Price: $249.00
Our Price: $245.00
Savings: $4.00
PRP High or Low Back Seat for Yamaha Rhino & Kawasaki Teryx - A18
List Price: $289.00
Our Price: $285.00
Savings: $4.00
Smittybilt's XRC 3 Winch encompasses all the best features you would want in a winch. Every XRC 3 (3,000 LB.) winch features a 3.9 HP Permanent Magnet Motor and a Planetary Gear System with 136:1 gear ratio that will deliver power and reliability at a premium price. This is a perfect recovery system for ATV & UTV applications, with the muscle and dependability to bail you out of any situation. The XRC 3 has all the heavy duty toughness you're looking for. Bolts to stock Rhino or Teryx pan using stock hardware.  Slotted for 4 point harness.
PRP High or Low Back EZN Seat for Yamaha Rhino & Kawasaki Teryx - A19 PRP 36" Bench Seat with 3" Shorter Cushion for Rhino/Teryx PRP 42" Bench with 3" Shorter Cushion for Rhino/Teryx
PRP High or Low Back EZN Seat for Yamaha Rhino & Kawasaki Teryx - A19
List Price: $299.00
Our Price: $295.00
Savings: $4.00
PRP 36" Bench Seat with 3" Shorter Cushion for Rhino/Teryx
List Price: $469.00
Our Price: $465.00
Savings: $4.00
PRP 42" Bench with 3" Shorter Cushion for Rhino/Teryx
List Price: $489.00
Our Price: $485.00
Savings: $4.00

PRP EZN Seats have lowered sides to make it easy to slide in and out of them. PRP also bent the headrest forward to provide more head support and allow a few more inches of clearance. They are easy to install, simply bolt to stock Rhino or Teryx pan using stock hardware.