|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bolt kit is required when installing shims with King/Fox/Icon Coilovers.
|
1/4" thick polyurethane spacer for your front suspension. Fits on top of the upper strut plate. Single 1/4″ spacers will normally fit without longer studs. Provides approxmately 3/8″ lift. These are custom made from an extremely tough and hard polyurethane formula, no crushing or cracking. Much cheaper than steel or aluminum.
|
Use this OME 5mm trim packer for adjustment on the front strut assembly, typically to correct the "driver's side lean."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use these OME driveshaft spacers when installing rear leaf springs taller than 1" to help reduce any vibrations.
|
Coachbuilder Front Strut Shim provide .50" of lift. You can use 1-2 per side. Installed above the top plate of the strut/coilover, instructions included. Bolt kit is required when installing with King/Fox/Icon 2.5 Coilovers.
|
Used For Installation of Rear Leaf Springs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This kit will drop the front differential of your Toyota Tacoma and is designed to put your factory CV shafts back to the stock angle after installing a 2-3" front leveling lift kit.
|
This Coachbuilder front differential drop kit lowers the front diff by 1" and reduces the CV angle improving geometry.
|
KYB strut mount plates are OE-quality replacement components designed to keep your strut in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with leaf springs. Kit includes bushings and sleeves for each side.
|
Extra Leaf for OME Leaf Springs. Increases weight carrying capability.
|
These MaxTrac 1 in.; Cast Iron; E-Coated; Non Tapered blocks are easily installed to give more clearance in the back of your truck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Whether you’ve got a leveling kit, body lift or full suspension lift, Timbren spacer kits allow you to make effective use of your Timbren SES kit while hauling or towing your gear.
|
Whether you’ve got a leveling kit, body lift or full suspension lift, Timbren spacer kits allow you to make effective use of your Timbren SES kit while hauling or towing your gear.
|
Designed to be used in conjunction with a leveling kit on 4WD models. Includes skid plate spacers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Help eliminate vibrations on your lifted '05-23 Toyota Tacoma with this carrier bearing spacer kit.
|
All-Pro Off-Road's U-bolt flip kit turns the U-bolts upside down so the bolt ends face up, away from the rocks. This mod both prevents damage to U-bolt threads and increases ground clearance. Kit comes complete with new heavy duty 8.5"L u-bolts, hardened u-bolt nuts and washers, and heavy duty CAD-plated u-bolt plates. Due to this flip kit eliminating the mounting point of the factory bumpstops, we can substitute the flip plate includes mounting holes for bumpstops to bolt to.
|
B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maxtrac strut spacers are some of the best in the industry in quality and pricing.
|
This High Density Progressive Polyurethane Coil Spacer lifts vehicles without sacrificing ride quality. It increases vehicle height, enhances performance, improves ground clearance, and allows for larger tires. Limited Lifetime Warranty. Fits 05+ Toyota Tacomas.
|
This 2.5" strut spacer is extremely high quality & fabricated from 1/4" steel, stamped top plates, and standardized hardware across all applications. This kit includes differential drop spacers for 4WD applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
|
Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
|
Are you ready to Lift your 2005 - 2013 Toyota Tacoma / Prerunner 2wd / 4wd truck, but need something a little more afforadable then the higher end suspension shock systems or lift kits that are available?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Upgrade worn ball joints on your SPC Performance Adjustable Upper Control Arms with these new joints. These ball joints are a direct replacement for the original joints that came with SPC Upper Control Arms only. Not for use with other upper control arms. Replaces Ball Joint on SPC Arms - 25460, 25470, 25485, 25540, 25660.
|
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application.
|
Nitrocharger Sport is the most advanced and innovative 4x4 shock absorber on the market, and is now available for a range of 4WDs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front coil springs for use with 6112 and 8112 shocks only. Not for use with OEM style shocks. Designed for 80-140 lbs. of added weight on '05+ Tacomas, '03+ 4Runners, and FJ Cruisers.
|
This kit lifts the truck an additional 2.5" in the front using the strut spacer and 1" in the rear using the included block and u-bolts.
|
Fits 2005 to 2015 Toyota Tacoma
Rear left with 0-1.5" of lift.
|
|
|
