|
|
|
|
|
|
|
|
|
|
|
|
|
|
D-Ring Style Shackle 16 x 19mm 3.25
|
D-Ring Style Shackle made from forged steel, 19 x 22mm 4.75, powdercoated yellow. 10,300-lb rated (4,700-kg) with conditional 12-month warranty.
|
Large recovery gloves in TJM's signature colors - black & yellow. Made from cowhide, synthetic leather, neoprene and spandex to properly protect your hands during recovery efforts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The recovery device made for the recovery device. TRED leashes assist in locating your TREDs should they bury beyond sight after vehicle recovery. Features floating padded handle. Available as an optional accessory and sold in pairs.
|
Heavy Duty Carry Bag for 31"L TREDs.
|
Features neoprene protectors, polyester webbing, and reinforced eyes. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This TJM Recovery Blanket will make a great addition to your recovery kit! Dampens energy in winch lines for added safety during recovery.
|
If you are winching or anchoring to a tree, TJM tree trunk protectors can protect both the tree from ring barking and your winch cable from unnecessary wear.
|
Features reinforced eyes, polyester webbing, and neoprene protectors. Includes storage bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This High Density Progressive Polyurethane Coil Spacer lifts vehicles without sacrificing ride quality. It increases vehicle height, enhances performance, improves ground clearance, and allows for larger tires. Limited Lifetime Warranty. Fits 07+ Jeep Wrangler JKs.
|
Heavy Duty Carry Bag for 42"L TREDs.
|
TJM Recovery Snatch Strap, 13,200-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM's light-weight aluminum hawse-style fairlead, perfect for use with synthetic winch lines.
|
|
2.5" x 16', 22,000-lb (10,000-kg). Features polyester webbing, reinforced eyes, and neoprene protectors. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM Recovery Snatch Strap, 17,600-lb rating with 20% elongation, high tenacity nylon webbing, & thermofixed for long wear.
|
Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present.
|
Includes mild steel hitch with forged steel 3/4" shackle. Conditional 12 month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large base and adjustable connector clamp will quickly get you out of any situation. Constructed of solid cast steel & finished in a durable powder coat. All hardware is zinc plated. Winch and pull up to 7,000lb.
|
Pro Runner Shock - Extended Length: 26.46"; Collasped Length: 16.67"; Travel: 9.8"; Upper Mount: Stem; Lower Mount: Loop; Non-adjustable, non-reservoir, zinc finsh with boot included, EACH. Pro Comp's Pro Runner Monotube Shocks are designed specifically for late model trucks, Jeeps and SUVs. The gas charged, monotube design delivers superior performance over traditional twin tube, hydraulic shocks. The vehicle specific ride tuning was derived after extensive dyno and real-world testing. The result is multi-stage valving that optimizes ride quality and handling characteristics for your specific application. The brushed, Zinc plated, clear coated, monotube shock body is nitrogen gas charged to eliminate performance-robbing cavitation during compression and rebound, allowing the shock to dissapate heat more efficiently, drastically reducing shock fade. Whether you are towing a trailer or hitting whoops in the desert, you can count on Pro Comp's Pro Runner Shocks to give you the confidence behind the wheel.
|
Pro Runner Shock - Extended Length: 26.76"; Collasped Length: 17.04"; Travel: 9.72"; Upper Mount: Loop; Lower Mount: Loop; Non-adjustable, non-reservoir, zinc finsh with boot included, EACH. Pro Comp's Pro Runner Monotube Shocks are designed specifically for late model trucks, Jeeps and SUVs. The gas charged, monotube design delivers superior performance over traditional twin tube, hydraulic shocks. The vehicle specific ride tuning was derived after extensive dyno and real-world testing. The result is multi-stage valving that optimizes ride quality and handling characteristics for your specific application. The brushed, Zinc plated, clear coated, monotube shock body is nitrogen gas charged to eliminate performance-robbing cavitation during compression and rebound, allowing the shock to dissapate heat more efficiently, drastically reducing shock fade. Whether you are towing a trailer or hitting whoops in the desert, you can count on Pro Comp's Pro Runner Shocks to give you the confidence behind the wheel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Runner Shock - Extended Length: 27.51"; Collasped Length: 17.32"; Travel: 14.19"; Upper Mount: Stem; Lower Mount: Loop; Non-adjustable, non-reservoir, zinc finsh with boot included, EACH. Pro Comp's Pro Runner Monotube Shocks are designed specifically for late model trucks, Jeeps and SUVs. The gas charged, monotube design delivers superior performance over traditional twin tube, hydraulic shocks. The vehicle specific ride tuning was derived after extensive dyno and real-world testing. The result is multi-stage valving that optimizes ride quality and handling characteristics for your specific application. The brushed, Zinc plated, clear coated, monotube shock body is nitrogen gas charged to eliminate performance-robbing cavitation during compression and rebound, allowing the shock to dissapate heat more efficiently, drastically reducing shock fade. Whether you are towing a trailer or hitting whoops in the desert, you can count on Pro Comp's Pro Runner Shocks to give you the confidence behind the wheel.
|
Pro Runner Shock - Extended Length: 29.38"; Collasped Length: 18.17"; Travel: 11.22"; Upper Mount: Stem; Lower Mount: Loop; Non-adjustable, non-reservoir, zinc finsh with boot included, EACH. Pro Comp's Pro Runner Monotube Shocks are designed specifically for late model trucks, Jeeps and SUVs. The gas charged, monotube design delivers superior performance over traditional twin tube, hydraulic shocks. The vehicle specific ride tuning was derived after extensive dyno and real-world testing. The result is multi-stage valving that optimizes ride quality and handling characteristics for your specific application. The brushed, Zinc plated, clear coated, monotube shock body is nitrogen gas charged to eliminate performance-robbing cavitation during compression and rebound, allowing the shock to dissapate heat more efficiently, drastically reducing shock fade. Whether you are towing a trailer or hitting whoops in the desert, you can count on Pro Comp's Pro Runner Shocks to give you the confidence behind the wheel.
|
Features high tenacity webbing, reinforced eyes, 20% elongation, and neoprene protectors. Thermofixed for long wear. Includes 12-month conditional warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TJM snatch blocks effectively double the capacity of your winch. They are also useful in recovery situations where the winch anchor point is not in a direct line of the vehicle winching direction. Greaseable steel pulley with cold rolled steel side plates. Conditional 12 month warranty. Color may vary.
|
Bilstein 5100 Series Shock for '07+ Jeep Wrangler JK with 2" of lift, Rear. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber. Must use wheel spacers or offset aftermarket wheels.
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration.
|
Bilstein Steering Stabilizer/Damper Shock, 5100 Series, for '07+ Jeep Wrangler JK.
Bilstein's 5100 Series Steering Stabilizers are made for late model trucks and Jeeps and feature a gas pressure monotube design that eliminates cavitation and foaming. Other features include: Precise steering damping, Reduces steering component vibration, Reduces wear and tear of steering components, Durable Corrosion resistant Bilstein Triple C process zinc finish, Digressive valving, made from the highest quality components, Offers optimum driver comfort & confidence, O.E. Replacement 36mm & 46mm models, Easy Installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bilstein 5100 Series Shock for '07+ Jeep Wrangler JK with 3.5-5" of lift, Front - Long Arm. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber.
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration.
|
Bilstein 5100 Series Shock for '07+ Jeep Wrangler JK with 3.5-5" of lift, Front - Short Arm. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber.
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration.
|
Bilstein 5100 Series Shock for '07+ Jeep Wrangler JK with 4" of lift, Rear. PLEASE NOTE: Compression bumpstop on chassis may need to be modified to prevent damage to the shock absorber.
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration.
|
|
|
