WARN® incorporates their off-road experience to deliver a tough, durable well thought out bumper. Tapered ends increase approach angles, pre-drilled holes for auxiliary lights, front clevis mounts and rear 2 receiver hitch to increase recovery options. Bumpers are laser cut using 3/16 thick steel and CNC formed, black powder coat adds the finishing touches. Winch mounts are sold separately.

WARN® incorporates their off-road experience to deliver a tough, durable well thought out bumper. Tapered ends increase approach angles, pre-drilled holes for auxiliary lights, front clevis mounts and rear 2 receiver hitch to increase recovery options. Bumpers are laser cut using 3/16 thick steel and CNC formed, black powder coat adds the finishing touches. Winch mounts are sold separately.

WARN® incorporates their off-road experience to deliver a tough, durable well thought out bumper. Tapered ends increase approach angles, pre-drilled holes for auxiliary lights, front clevis mounts and rear 2 receiver hitch to increase recovery options. Bumpers are laser cut using 3/16 thick steel and CNC formed, black powder coat adds the finishing touches. Winch mounts are sold separately.

The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features.

Generally vehicles that run larger tha 35" tires may rub the tire on the wings of a traditional style ARB Deluxe bar. The JK Stubby Bar eliminates this issue on the Jeep JK since the bar is only as wide as the vehicles grill panel. Even though the bar itself is very compact it still has many features including full SRS compatibility. Each outer wing section features high lift jacking points. Brackets are provided for fitment of driving lights to the bar. And sitting on top of the 76mm (3") main tube is a mount that can be used for LED light bars or communication antennas. Central on each outer wing section are 20mm (.79") thick 350 grade recovery points which tie through the winges and into the chassis mounts directly. The kit also features a new bracket to relocate the vacuum pump on later model vehicles. The winch platform will allow the mounting of most traditional low mount style winches and narrow mount pattern competition type winches. A bracket is provided for those who wish to run their control box in the center of the bar. Two front 'flip up' style license plate mounts are provided. One to suit roller fairleads and one for the Hawse type fairlead. These allow the number plate to be located over the fairlead and flipped up out of the way when the winch is in use.

Smittybilt's M1 Bumpers will set the standard for all truck bumpers to follow. Each M1 is manufactured out of 3/16" cold rolled steel with 1/4" mounting plates and powder coated in Smittybilt's signature series two stage powder coat. Each M1 comes standard with 7/8 inch solid D-Ring mounts, Ultra Bright Driving & Fog Lights, Winch Mount System that can hold up to a 16,500 lb winch and completely bolts on and requires no drilling.

This TJM Type 3 Frontal Protection Bar has been designed to satisfy the demands of the discerning Jeep JK Wrangler owner. Carefully crafted to suit the styling of the new Wrangler while providing maximum protection and a host of features including an outstanding approach angle, light mounting points, increased viewing and access area for the winch, shackle mounts, original equipment fog light provision, steering box guard and a winch frame that takes an array of winches... all standard on this attractive piece of metal. You just can't go past this bar for value for money and it's available now!

Exclusive 2 piece design keeps the weight down so this winch bumper won’t nose dive the front of the truck. 3/16" sub frame/winch plate is attached directly to the front frame rails for the ultimate in strength. Designed for up to a 9500 pound winch, side control box design works best. There is extra room to mount a small air compressor. The otter steel shell mounts up with eight bolts at the shackle points so the entire installation is all bolt on! 11 gauge outer shell provides strength while keeping the weight to a minimum. 4" light pockets will take either after market lights or the OEM fog lights. Additional mounting points for two more lights on top of the bumper. High clearance corners for maximum off road performance. Low center section provides skid plate type protection for the front area of the vehicle.

TJM T3 Outback Bull Bar for 2007+ Toyota FJ Cruisers. Airbag Compatible, Black Powder Coat, Driving Light Provisions, Fog Lamps Included, Jacking Points, Steel Construction, Winch Compatible with Winch Frame Included.

TJM T13 Bull Bar for 1990-1997 Toyota FJ-80 Landcruisers featuring: Aerial Tabs, Black Powder Coat, Bumper Replacement, Driving Light Provisions, Indicator Assembly, Rated to take a 9,500lb winch, Steel Construction, Winch Compatible with Winch Frame Included. Non-airbag compatible, no fog lights.

TJM T13 Bull Bar for 2007+ Toyota FJ Cruisers featuring 2" (50mm) Pipework, Aerial Tabs, Airbag Compatible, Black Powder Coat, Bumper Replacement, Driving Light Provisions, Fog Lamps Included, Jacking Points, Steel Construction, Winch Compatible with Winch Frame Included, & Winch Viewing Slot.