|
|
|
|
|
|
|
|
|
|
|
These extended thread lug nuts ensure that there is more thread engagement on the relatively short factory studs. These are required to install front wheel spacers, though recommended for the rear as well. Also recommended for thicker aluminum wheels. For use with 12mm Toyota studs only. Sold individually, enter quantity '6' for each wheel, or '24' for a full set.
|
These extended thread lug nuts ensure that there is more thread engagement on the relatively short factory studs. These are sometimes required to install front wheel spacers, though recommended for the rear as well. Also recommended for thicker aluminum wheels. For use with 14mm studs only. Sold individually, example: enter quantity '5' for each 5 lug wheel, or '20' for a full set.
|
You should have a plug kit in every car you own.
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes 20 replacement tire repair cords.
|
These 4 on 110mm bolt pattern wheel spacers are 2.0" thick, adding 4.0" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. Sold individually, enter quantity "2" for a pair.
|
These 6 on 4.5" bolt pattern wheel spacers are 1.5" thick, adding 3.0" to the overall track width.
|
|
|
|
|
|
|
|
|
|
|
|
|
If you need that 5th Monster valve for your matching spare wheel then here's where you order it. With an aluminum body and collar and brass cap the total weight of each valve is a mere 1.1 oz. Due to its construction it is 5 times stiffer than a standard metal valve.
|
INCLUDES:
- Two (2) New 1.0" Thick 4x156mm Aluminum Wheel
Spacers with 3/8-24 Pressed-In Grade 8 studs
- Eight (8) Open-end Acorn Style Lug Nuts
- Installation Instructions
|
INCLUDES:
Two (2) New 2.0" Thick 4x156mm Aluminum Wheel
Spacers with 3/8-24 Pressed-In Grade 8 studs Eight (8) Open-end Acorn Style Lug Nuts Installation Instructions
|
|
|
|
|
|
|
|
|
|
|
|
|
1x Cord needle tool, 1x Tire rasp replacement needle, allen key, trim tool, lubricant, 20x Repair cords, valve core tool, 4x replacement valves, pointy nose pliers and robust moulded storage case.
|
These 6 on 5.5" bolt pattern wheel spacers are 1.5" thick, adding 3.0" to the overall track width for greater stability and improved handling with a more aggressive stance. They are easy to install, instructions are included. Made from high quality 6061-T6 aluminum. They are designed to be hub centric with a center bore of 78.36mm on 6 lug Chevrolet and GMC applications. Sold individually, enter quantity '2' for a pair.
|
Fits '07+ Toyota Tundras (and others). Includes 24 X 14mmx1.5 Black Lug Nuts, 4 Chrome Valve Stems, and 1 Lug Socket.
|
|
|
|
|
|
|
|
|
|
|
|
|
3 1/2” Dial, 0 - 60 psi, 45cm rubber (NBR) extension hose. Rubber body impact protection cover. ANSI grade B accuracy. 360° swiveling brass valve connector with deflation nipple and air release button. Stored in a blow mold case.
|
Machined from solid brass, these little deflators are easy to use and very accurate. Set-up is easy too. The whole kit includes four (4) deflators and a leather pouch for storage. Just screw them on to your wheel stems and walk away. They automatically stop bleeding air when it gets to your pre-set pressure. They are adjustable from 6-30 PSI and are the most sensitive automatic deflators on the market and they're built to last. Get a set of these and you'll use them for the rest of your life.
|
Monster Valves are oversized, light weight yet strong valve stems that you install as a second stem to your wheel. Made from 7018 aluminum, they are the FASTEST tire deflation product on the market. Imagine airing down a 39.5x13.50 tire down 30 PSI in 30 seconds. This kit also includes a Monster Chuck which, when used with a Power Tank, will inflate that same tire in 50-60 seconds. And they are EASY to install into steel or aluminum wheels. Just drill a 7/16" hole, tap 1/4" NPT threads, and screw them in. Done. You don’t even have to remove your tire from the rim. With an aluminum body and collar and brass cap the total weight of each valve is a mere 1.1 oz. Due to its construction it is 5 times stiffer than a standard metal valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monster Valves are FAST! What else will deflate a 40" tire 1 PSI per Second?! Steve found that the easiest way to use his Monster Valves most efficiently was to use the clip-on pressure gauge on his stock valve. This way he can monitor his dropping tire pressure so he knows exactly when to close the collar. The same goes for inflating. The clip-on tire pressure gauge saves time because you know exactly when to stop filling. With an aluminum body and collar and brass cap the total weight of each valve is a mere 1.1 oz. Due to its construction it is 5 times stiffer than a standard metal valve.
|
If you have a full size spare you may want to get this kit. It includes a 5th Monster Valve for your spare and saves you $$.
Remember, if you're running 50+ PSI tires then tell us to make your inflator with a 0-160 PSI liquid filled gauge.
|
|