A snatch strap is an essential component of any off-road traveler’s recovery kit. Connected to a bogged vehicle and a pulling recovery vehicle, a snatch strap stores kinetic energy under load from the pulling vehicle that can then be used to free a bogged vehicle that’s unable to move using its own power. The TJM 8T Snatch Strap Kit has everything you need to perform a safe snatch strap vehicle recovery: an 17,637 lbs. snatch strap, two 0.63 inch bow shackles (working load limit 7,165 lbs.) and a pair of recovery gloves, as well as a gear bag and a handy safety guidelines booklet. Manufactured to the highest quality, every component in the kit has been engineered and tested to perform when it counts. To ensure a safe recovery, it’s recommended that the minimum breaking strength of the strap should be 2-3 times the Gross Vehicle Mass (GVM) of the lightest vehicle in the recovery.

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.