CO2 Tank Power Bracket 10-15 lb. 6.9 in. Diameter Stainless Steel from Power Tank. Made for CO2 10 and 15 lb. bottles, Nitrous Oxide, Scuba and Nitrogen bottles that are a standard 6.9-7 in. diameter. The Power Bracket combines the best features of all of our brackets into one. It features a Stainless Steel frame with a stout floor that is TIG welded into place.

Two stainless steel straps and lockable latches hold the tank securely into the marine-grade stainless steel frame against seven rubber bumper pads. Stainless steel rivets hold the straps and latches together maximizing its strength.

Made to fit tanks with tank boots, the bolt hole pattern is within the boot base void so the tank sits flat to the floor. And of course the bolt pattern in the frame matches our roll bar clamps for a clean easy fit. This taller frame works great with the taller 15 lb. Power Tanks.

The Power Bracket is also available in Competition Spec with two T-bolt clamps and threaded closures. The straps increase the holding strength of the bracket and is the recommended configuration for full race vehicles. It does not lock.

• Link to drawing

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.