Center step area with license plate mount, re-use OEM license plate lights, 3/16" thick steel plate construction, retain OEM hitch, mounts to OEM frame brackets. Bumper attaches to the frame brackets with eight grade 8 bolts through a 1/4" thick steel plate with recovery shackles. Replace the shackle plates with latch plate and bearing barrel plates when adding the TN-5293 swing arm tire carrier by replacing the shackles. Bolt on installation. Dual process textured black powder coat finish.

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov .  PRODUCT WARNING/LIABILITY DISCLAIMER:  Aftermarket accessories are intended to modify and/or prepare a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. These uses include high performance demands and negotiation of rough terrain. These conditions have extreme variance and cannot be controlled by the vehicle manufacturer or aftermarket accessory manufacturer. Therefore, the safe control of your vehicle is entirely your responsibility. Do not purchase parts unless you are willing to accept this responsibility. Do not install any part that you do not feel competent at installing without causing present or future injury to yourself or others; consult a professional installer.  Modification of your vehicle to enhance performance can result is dangerous situations that may result in bodily harm. The buyer hereby assumes all risks associated with any such modifications. The seller will not accept responsibility for personal injury or property damage arising from the failure of any parts.