|
|
|
|
|
|
|
|
|
|
|
|
|
|
In 2007 Jeep introduced the new JK Wrangler. There were many upgrades from the older version including a Electronic sway bar disconnect for the Rubicon models. Our sway bar drop will not work with this new version so we have produced an extended sway bar link to span the increased distance from sway bar to axle at full droop. The sway bar links are made of solid steel tube with polyurethane ends and come with all of the necessary hardware for easy installation.
|
|
1 in.; Cast Iron; E-Coated; Non Tapered
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When lifting the rear end of the 05-13 Toyota Tacoma trucks by 3" or more, it's recommended to use a carrier bearing spacer kit to eliminate possible drive line vibrations. This kit also comes with the brake line brackets.
|
The rear of the 2WD Nissan Titans require a carrier bearing spacer when being lifted 3" or 4". Without the Maxtrac Suspension carrier bearing spacer, your Titan will experience drive line vibration and other possible issues when accelerating from a stop. This kit is easy to install with instructions and all necessary hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maxtrac offers up rear lifting shackles as an alternative to the regular steel blocks and u-bolt combination. These shackles give a minor lift in the rear, depending on application, anywhere from 1/2" to 1.5". Not only are these easier to install than blocks, they can be combined together to get additional lift, or to fine tune the ride height in the rear. Constructed of solid steel, urethane bushings, and powder coated in gunmetal, nothing matches our leveling kits better.
|
Maxtrac offers up rear lifting shackles as an alternative to the regular steel blocks and u-bolt combination. These shackles give a minor lift in the rear, depending on appplication, anywhere from 1/2" to 1.5". Not only are these easier to install than blocks, they can be combined together to get additional lift, or to fine tune the ride height in the rear. Constructed of solid steel, urethane bushings, and powder coated in gunmetal, nothing matches our leveling kits better.
|
Maxtrac Suspension provides extremely high quality fabricated strut spacers made from 1/4" steel, stamped top plates, and standardized hardware across all applications. Maxtrac knows that the leveling market is highly competitive, and that is why our parts are some of the best in the industry in quality and pricing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maxtrac Suspension provides extremely high quality fabricated strut spacers made from 1/4" steel, stamped top plates, and standardized hardware across all applications. Maxtrac knows that the leveling market is highly competitive, and that is why our parts are some of the best in the industry in quality and pricing.
|
Maxtrac Suspension provides extremely high quality fabricated strut spacers made from 1/4" steel, stamped top plates, and standardized hardware across all applications. Maxtrac knows that the leveling market is highly competitive, and that is why our parts are some of the best in the industry in quality and pricing.
|
Maxtrac Suspension provides extremely high quality fabricated strut spacers made from 1/4" steel, stamped top plates, and standardized hardware across all applications. Maxtrac knows that the leveling market is highly competitive, and that is why our parts are some of the best in the industry in quality and pricing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maxtrac Suspension provides extremely high quality fabricated strut spacers made from 1/4" steel, stamped top plates, and standardized hardware across all applications.
|
This 2.5" strut spacer is extremely high quality & fabricated from 1/4" steel, stamped top plates, & standardized hardware across all applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MaxTrac 716710 provides 1" rear lift shackles for your 2007-2020 Toyota Tundra.
|
We've listened to your calls, and we've delivered, a Jeep JK kit that is affordable, and covers all the bases. Maxtrac Suspension's new Jeep JK Wrangler kit pays attention to the details, including everything you can ask for on a moderate lift kit. Along with our solid spring spacers, also included are shock extensions, bump stop spacers, brake line extension brackets, sway bar drop bracket, and all the assorted hardware required to do a complete installation. You aren't going to find a better kit on the market today.
|
Maxtrac Suspension provides extremely high quality fabricated strut spacers made from 1/4" steel, stamped top plates, and standardized hardware across all applications. This kit also includes the diff drop spacer for 4WD applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 2.5" strut spacer is extremely high quality & fabricated from 1/4" steel, stamped top plates, and standardized hardware across all applications. This kit includes differential drop spacers for 4WD applications.
|
Fabricated used DOM tubing, vulcanized rubber bushings and high strength ball joints, with a durable powder coat finish.
|
Maxtrac Suspension has introduced a new option to replace the light, fragile, stock steering knuckles on the Toyota Tacoma and FJ Cruiser platforms. These 4" lifted spindles are a beefy piece of machinery, constructed out of ductile iron from a cast mold, a giant upgrade over the OEM parts. With a true increase in ground clearance, this gives you options for bigger wheels and tires, new places to explore, and the confidence in solid parts handling it all. Due to these lifted spindles maintaining stock steering geometry, you can continue to run the OEM front struts / coilovers, along with being able to continue to modify your suspension with additional strut spacers, aftermarket coilovers, or new control arms which utilize the stock mounting components.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maxtrac Suspension's lifted spindles are a simple, but extremely effective way of gaining additional clearance in the front of your vehicle. By simply replacing your stock spindle, you can achieve an additional 4", while using stock control arms, springs, and shocks. Maxtrac's spindles are made from Ductile Iron, and are designed to be 100% bolt on, with no modifications necessary.
|
|
Maxtrac Suspension has introduced a new option to replace the light, fragile, stock steering knuckles on the Toyota Tundra platform.
|
|
|
